usariemen
Master of my domain.
If as a thief you are cool and brutal enough it looks like you just pry and break away a part of the taillight and you have access to the screws.

what I do is use a heavy duty bike cable 2m in length with a sturdy lock, wrap the cable around the rack and then through the tow bar loop beneath the CaliView attachment 62296
I like your thinking but it would probably only hamper resale rather than theft. That might be enough justification of course.Good idea, I think I'll take the Dremel out this evening and engrave my registration number in a couple of places around the rack.
Sent from my CLT-L09 using Tapatalk
I had one and found it pretty useless. It relies on another tile owner being in close proximity to your tile to pick up its location and share with you via the App. It doesn’t just send its location to you automatically. I tested mine out in various situations and never got a notification of its whereabouts.Has anyone had any experience with trackers? I'm looking at slipping a 'tile tracker' (google them) into the frame of my bike rack. £30, 3yr battery life, works via bluetooth and uses a community of users mobile phones to locate missing tiles.
I like your thinking but it would probably only hamper resale rather than theft. That might be enough justification of course.
Excellent, I believe this is the solution.Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.
![]()
Saddle Lock Security Set - Protects Saddle & Seat Post
Bike Saddle & Seat Post Lock - The Hexlox Saddle Lock Security Set delivers a high level of security against theft with an elegant and user friendly solution. Bike security - Made in Germany.hexlox.com
They magnetically clip into the bolt head and are impossible to remove without the key.
That looks great. You'd need to replace the 'security' bolts with normal hex bolts first by the look of it.Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.
![]()
Saddle Lock Security Set - Protects Saddle & Seat Post
Bike Saddle & Seat Post Lock - The Hexlox Saddle Lock Security Set delivers a high level of security against theft with an elegant and user friendly solution. Bike security - Made in Germany.hexlox.com
They magnetically clip into the bolt head and are impossible to remove without the key.
Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.
![]()
Saddle Lock Security Set - Protects Saddle & Seat Post
Bike Saddle & Seat Post Lock - The Hexlox Saddle Lock Security Set delivers a high level of security against theft with an elegant and user friendly solution. Bike security - Made in Germany.hexlox.com
They magnetically clip into the bolt head and are impossible to remove without the key.
That looks great. You'd need to replace the 'security' bolts with normal hex bolts first by the look of it.
Sent from my CLT-L09 using Tapatalk
Hi again - I’m just about to order some of the Hexlox lock security devices - I’ve just checked and I’m sure the bolts in the bike carrier are M5 50mm and not M6 ?? It’s difficult to tell with the torx but I have some hex M5 30 mm and the diameter / thread fits the carrier. Just need to know the exact size 1) to order some replacement hex tapered bolts 2) the correct size Hexlox device.M6 50mm
Sent from my CLT-L09 using Tapatalk
Resist the pressure do not tell!Do you suggest someone should be posting a step by step guide on how to do it on here? So that other thieves also know how?
Thanks for the photos and feedback - What they need to know is the hex wrench fitting size to match the Hexlox device - might be a daft question but is the diameter of the thread the same as the size of the hex key ie 5mm thread = 5mm hex key, 6mm thread = 6 mm hex key also, Hexlox can supply decent bolts that are magnetic with a tapered edge so can’t be gripped - about a £1 eachOK, here are the measurements for the bolt from my rack.
50mm long and 6 mm diameter.
As mentioned by someone else earlier, the bolt is a lot longer than it needs to be (possibly to aid installation) , I couldn't get a decent photo of the bolt in situ but the orange arrow is pointing to the excess thread. You could probably get away with 25 mm or 30 mm.
The size of Hexlox will depend on the size of Allen key required for the replacement bolt.
Another thing to consider that I discovered from when I was researching Hexlox, the bolts you use should be magnetic and not all grades of stainless steel are.
I'm waiting on bolts arriving myself before I order the Hexlox, first to make sure they're magnetic and secondly to see what size I need to order.
![]()
![]()
![]()
![]()
Sent from my CLT-L09 using Tapatalk
is the diameter of the thread the same as the size of the hex key ie 5mm thread = 5mm hex key, 6mm thread = 6 mm hex key also
From the Hexlox website, if you order M5 bolts, use 4mm Hexlox. If you order M6 bolts, use 5mm Hexlox.![]()
![]()
so, have you decided what bolts you are going to order from Hexlox to replace the torx bolts and what size Hexlox insets ?
Sent from my CLT-L09 using Tapatalk
The VW California Club is the worlds largest resource for all owners and enthusiasts of VW California campervans.