How are VW Tailgate racks stolen?

If as a thief you are cool and brutal enough it looks like you just pry and break away a part of the taillight and you have access to the screws.
 
Agree no need to be alarmist, but at £500 a time we may wish to be wise as to seeking to reduce such crime, and perhaps get ahead of the issue before it becomes a serious problem for us?

Is there anybody on this site directly connected with VW who may be able to help? -

Could there be some kind of checking system by VW parts with orders for replacement catches (bits left on the tailgate); similar to the system operated for orders of outboard motor covers (for those not aware, owners remove the original cover and place a plastic temporary cover when away from their boat - if the motor is stolen then the thief has to source a replacement cover. All manufacturers/distributors - operate a checking and alert system, if an order comes in for replacement cover without proof of ownership of motor; it deters a lot of such theft). This may help to stop the thefts if there is difficulty in selling racks without the catches, or obtaining replacement catches?
 
Who actually makes the Bicycle racks? I very much doubt if it is VW itself. Just like the tables, chairs and awning all supplied by VW but not actually manufactured. Those are the people you need to get hold of in the first instance.
 
I have done 5 minutes googling and found replacement catches available to buy cheaply.:(
 
Well, great news! Perhaps we should all do our best to make the theft of these items less attractive;

If possible change the method of securing to a means less easy to remove from the tailgate (suggestions have been previously posted, but I am sure there are many other ideas out there), I know it will perhaps be just delaying a theft, but sometimes that delay might mean the difference between an attempted theft and a theft.

Also consider marking the rack so that it is not so easy to sell on without obvious questions being asked by any potential customer, and making a stolen rack identifiable to the police, and general VW community.
 
I must admit when I first removed the T6 bike rack to store it, I couldn’t believe how easy it was take off the Cali - Solo, no help, not even 5 minutes ! I had assumed that the tailgate would need to be open and that there would be some hidden fixings or similar at the two contact points on the top brackets but as everyone now knows there isn’t, they just sit on the tailgate .
I also assumed the screw heads would be individualised designs a bit like locking wheel nuts - but no just a standard head.
I, therefore, now always remove the rack unless I intend to use it. Then, if carrying bikes etc what I do is use a heavy duty bike cable 2m in length with a sturdy lock, wrap the cable around the rack and then through the tow bar loop beneath the Cali, ok if they have bolt croppers, grinder etc they could still take it but this will Hopefully stop opportunist and less equipped thieves !
7AB78469-CD50-4119-8D1B-3C674A659036.jpeg
 
what I do is use a heavy duty bike cable 2m in length with a sturdy lock, wrap the cable around the rack and then through the tow bar loop beneath the CaliView attachment 62296

Good idea, I think I'll take the Dremel out this evening and engrave my registration number in a couple of places around the rack.

Sent from my CLT-L09 using Tapatalk
 
Good idea, I think I'll take the Dremel out this evening and engrave my registration number in a couple of places around the rack.

Sent from my CLT-L09 using Tapatalk
I like your thinking but it would probably only hamper resale rather than theft. That might be enough justification of course.
 
Has anyone had any experience with trackers? I'm looking at slipping a 'tile tracker' (google them) into the frame of my bike rack. £30, 3yr battery life, works via bluetooth and uses a community of users mobile phones to locate missing tiles.
 
Has anyone had any experience with trackers? I'm looking at slipping a 'tile tracker' (google them) into the frame of my bike rack. £30, 3yr battery life, works via bluetooth and uses a community of users mobile phones to locate missing tiles.
I had one and found it pretty useless. It relies on another tile owner being in close proximity to your tile to pick up its location and share with you via the App. It doesn’t just send its location to you automatically. I tested mine out in various situations and never got a notification of its whereabouts.
 
I like your thinking but it would probably only hamper resale rather than theft. That might be enough justification of course.

True, but if not marked and stolen then it can be bought by anybody without knowing it is stolen (any of us could buy it), but if marked a lot of potential buyers, like all of us, will be put off; the value will be reduced, and it will be identifiable if found in the hands of some sub-species.

So mark it, and seek to make it less easy to remove from the back of our treasured vans.
 
Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.


They magnetically clip into the bolt head and are impossible to remove without the key.
 
Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.


They magnetically clip into the bolt head and are impossible to remove without the key.
Excellent, I believe this is the solution.
Won’t stop someone taking an angle grinder to the securing brackets but that takes time and makes a noise !
 
Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.


They magnetically clip into the bolt head and are impossible to remove without the key.
That looks great. You'd need to replace the 'security' bolts with normal hex bolts first by the look of it.

Sent from my CLT-L09 using Tapatalk
 
Anyone know what size the bolt is? I use these on my bike and they're amazing! They do 4,5 and 6mm sizes.


They magnetically clip into the bolt head and are impossible to remove without the key.
That looks great. You'd need to replace the 'security' bolts with normal hex bolts first by the look of it.

Sent from my CLT-L09 using Tapatalk


what size hex bolts would you need to replace the security bolts ?
 
M6 50mm

Sent from my CLT-L09 using Tapatalk
 
M6 50mm

Sent from my CLT-L09 using Tapatalk
Hi again - I’m just about to order some of the Hexlox lock security devices - I’ve just checked and I’m sure the bolts in the bike carrier are M5 50mm and not M6 ?? It’s difficult to tell with the torx but I have some hex M5 30 mm and the diameter / thread fits the carrier. Just need to know the exact size 1) to order some replacement hex tapered bolts 2) the correct size Hexlox device.
 
I'll take some measurements for you. I'm just repeating information from earlier in the thread

Sent from my CLT-L09 using Tapatalk
 
OK, here are the measurements for the bolt from my rack.

50mm long and 6 mm diameter.

As mentioned by someone else earlier, the bolt is a lot longer than it needs to be (possibly to aid installation) , I couldn't get a decent photo of the bolt in situ but the orange arrow is pointing to the excess thread. You could probably get away with 25 mm or 30 mm.

The size of Hexlox will depend on the size of Allen key required for the replacement bolt.

Another thing to consider that I discovered from when I was researching Hexlox, the bolts you use should be magnetic and not all grades of stainless steel are.

I'm waiting on bolts arriving myself before I order the Hexlox, first to make sure they're magnetic and secondly to see what size I need to order.

e0f77727b4bbabd8541bd7f1bb6faa3b.jpg
1bf33244c58258eb30673258b1ccda02.jpg
11619eae7c2f9621df1e6351ad5100b1.jpg
01c22e3d856555b24694b0300cf319ad.jpg


Sent from my CLT-L09 using Tapatalk
 
Sorry I should add the rack is from a T6 Ocean.
c1038fb25bbdb0bf99411e132803628b.jpg


Sent from my CLT-L09 using Tapatalk
 
Do you suggest someone should be posting a step by step guide on how to do it on here? So that other thieves also know how?
Resist the pressure do not tell!
 
OK, here are the measurements for the bolt from my rack.

50mm long and 6 mm diameter.

As mentioned by someone else earlier, the bolt is a lot longer than it needs to be (possibly to aid installation) , I couldn't get a decent photo of the bolt in situ but the orange arrow is pointing to the excess thread. You could probably get away with 25 mm or 30 mm.

The size of Hexlox will depend on the size of Allen key required for the replacement bolt.

Another thing to consider that I discovered from when I was researching Hexlox, the bolts you use should be magnetic and not all grades of stainless steel are.

I'm waiting on bolts arriving myself before I order the Hexlox, first to make sure they're magnetic and secondly to see what size I need to order.

e0f77727b4bbabd8541bd7f1bb6faa3b.jpg
1bf33244c58258eb30673258b1ccda02.jpg
11619eae7c2f9621df1e6351ad5100b1.jpg
01c22e3d856555b24694b0300cf319ad.jpg


Sent from my CLT-L09 using Tapatalk
Thanks for the photos and feedback - What they need to know is the hex wrench fitting size to match the Hexlox device - might be a daft question but is the diameter of the thread the same as the size of the hex key ie 5mm thread = 5mm hex key, 6mm thread = 6 mm hex key also, Hexlox can supply decent bolts that are magnetic with a tapered edge so can’t be gripped - about a £1 each
 
is the diameter of the thread the same as the size of the hex key ie 5mm thread = 5mm hex key, 6mm thread = 6 mm hex key also

I don't know is my honest answer.

I'm sure if Hexlox are supplying the bolts, they'll know which size Hexlox device to give you also.

I didn't realise they sold bolts too, I'll look into that.


Sent from my CLT-L09 using Tapatalk
 
From the Hexlox website, if you order M5 bolts, use 4mm Hexlox. If you order M6 bolts, use 5mm Hexlox.
ba8fd60262e6a2c1dc09c4340827b6bf.jpg
8a5d9becf2e6b45edf96b5a9b843ecc5.jpg


Sent from my CLT-L09 using Tapatalk
 
From the Hexlox website, if you order M5 bolts, use 4mm Hexlox. If you order M6 bolts, use 5mm Hexlox.
ba8fd60262e6a2c1dc09c4340827b6bf.jpg
8a5d9becf2e6b45edf96b5a9b843ecc5.jpg


so, have you decided what bolts you are going to order from Hexlox to replace the torx bolts and what size Hexlox insets ?

Sent from my CLT-L09 using Tapatalk
 
Back
Top