T5.1 Gas Stove Torx Bolt

[redhairjon]

Hi there!
I would like to replace my corroded torx bolt that holds down the stove hob. Does anyone know a source for the bolt?

 

[Roger Boeken]

Unscrew , measure and look up on amazon ?

 

[vbk1975]

I swapped mine for A4 stainless steel versions 5 years ago from https://www.accu.co.uk/

I use accu all the time and I find them excellent. A4 is marine grade stainless.

I can’t find the invoice to confirm size, just unscrew one and measure head size and length. The are screws not bolts.

A

 

[redhairjon]

I swapped mine for A4 stainless steel versions 5 years ago from https://www.accu.co.uk/

I use accu all the time and I find them excellent. A4 is marine grade stainless.

I can’t find the invoice to confirm size, just unscrew one and measure head size and length. The are screws not bolts.

A

Thanks this is really helpful!

 

[vbk1975]

Thanks this is really helpful!

@redhairjon

Just gone through my emails, please check, but I think these are the ones

No.4 (2.9mm) x 1.1/4 inch (32mm) Torx Self Tapping Countersunk Screws

https://www.accu.co.uk/self-tapping-raised-torx-screws/479841-SHRKT-No-4-1-1-4-V2-A4

The heads are slightly smaller than the factory ones, but we haven't had any issues.

Please i would recommend you measure and don't assume i am right!!

 

[redhairjon]

Amazing! Thank you so much, I’ll let you know how it goes!