Sarcasm aside, usually this forum creates discussion and useful advice. When many hundreds of miles from home and on a timeline many of us do not have the luxury of workshop facilities or suchlike and all options have to be considered. Very lucky to find a mechanic and garage that looked at car next day….after removing air filter and other equipment acces to the rear of the bulbs was facilitated. The H7 bulbs had blown, both on only 1 filament. The H1 main beams then became inoperative? Seemingly all bulbs not working except 1 filament of H7 when main beams then became selected……wiring checked out and replacing both H7, dual pin, dual filament bulbs and reseating the H1 main beams all then worked as normal. What caused double bulb failure at the same time is a mystery……first ever headlamp bulb change in my 18 years since new and 130,000 miles…pa if the bulb retaining clip comes out of its holder and falls into engine bay just hope you can find it……I was lucky. Thanks again for any advice…