Hubble
- Messages
 - 70
 
- Vehicle
 - T4 PopTop
 
Hi
My Kitchen tap stopped working a while ago (I've done the old take it apart and clean the micro switch etc which fixed it briefly but now it doesn't work at all). So I bought a replacement which looks exactly the same but when it arrived it's a hot/colder mixer tap. The ebay advert says it can be installed as cold water only but I'm not sure how to do this. Does anyone have experience of this? Do I need to blank off the hot water connection to stop it leaking out of there? Also there are only two wires so I'm wondering if it works a bit differently from an electrical point of view.
				
			My Kitchen tap stopped working a while ago (I've done the old take it apart and clean the micro switch etc which fixed it briefly but now it doesn't work at all). So I bought a replacement which looks exactly the same but when it arrived it's a hot/colder mixer tap. The ebay advert says it can be installed as cold water only but I'm not sure how to do this. Does anyone have experience of this? Do I need to blank off the hot water connection to stop it leaking out of there? Also there are only two wires so I'm wondering if it works a bit differently from an electrical point of view.
				
	
					
				
						
					










