How are VW Tailgate racks stolen?

It comes up with a similar thread on this forum! Less detailed though. We like to be helpful.....
With a plethora of Cali owners having the VW rack I think it’s important to highlight this issue and the possible consequences.
It’s no different to the spare wheel thefts reported on here, although there is a device to stop that
 
Which brings me back to my 1st post, who is claiming they are theftproof. Is it the manufacturers or the dealers. I’ve had 2 and I’ve never been told they are theftproof by anyone. I just take a chance it’s still hanging off the back every morning.

Well, given the bikes arent tied on with poppers, I think it's safe to say the idea is that the bikes and bike rack arent intended to be easily stolen.....
 
So with Ch1pbutty's helpful photo, it looks like the short end of an 'allen' key and a bit of time gets you in. Does anyone disagree with this and have a photo to suggest otherwise?

If that's the case, security bolts that need a matching head to remove might help in two ways. 1) you need the right head to match the bolts and 2) the length of the head and the required wrench / flexible drive, may mean there is insufficient space.
That would leave thieves relying on brute force, or disassembling the rack (taking the black brackets off the aluminium frame).
hat's the way it is,
Just watched a fitting video and the 'security bolt' used to fit is on the outside. This makes it very easy to steal.

we've seen that already
 
Hi Tim would you be able to identify which bike rack style you had from the two images below

View attachment 62133

View attachment 62134
For anyone following, the top one is the Kylie design carried over from the T5. The lower one is the Quasimodo.

**From the 2 images supplied, the bolt on the Quasi (lower) looks much easier to access than the Kylie (which I believe was Ch1pbutty's photo**
 
I had occasion to remove a T6 rack a couple of weeks ago. I was expecting a wrestle and allowed a lot of time. However, it was simply a matter of loosening the torx tamper resist threaded bolts on each of the lower arms of the rack sufficiently that the clamping plate loosened. I then turned my attention to the upper arms and their bolts, but it turned out that there is no clamping element to the upper arms, as illustrated in a post above. They are just hooks that lift off. To my best recollection I did not open the tailgate at any time.

This debate wasn’t active at the time so I paid it no special attention, but thinking back I think I just loosened the bolts sufficiently such that there was room to manoeuvre the rack off without opening the boot. About 2 minutes without referral to the manual, which at that point had been ‘put somewhere safe’.
 
But who is buying the stolen ones? Where are they advertised?
 
So with Ch1pbutty's helpful photo, it looks like the short end of an 'allen' key and a bit of time gets you in. Does anyone disagree with this and have a photo to suggest otherwise?

If that's the case, security bolts that need a matching head to remove might help in two ways. 1) you need the right head to match the bolts and 2) the length of the head and the required wrench / flexible drive, may mean there is insufficient space.
That would leave thieves relying on brute force, or disassembling the rack (taking the black brackets off the aluminium frame).
Meant to say that that is the way it is and just to hold the thief off a bit you
could fit 2 different screw heads in there, i think, and only think, that they are
M5 60mm.
 
Would it be feasible to have the vehicle reg etched on the rack, In a clear and prominent position so others see it before stealing,?

it would also be a deterrent to those who buy the rack ?
 
One way screw would make it very difficult to remove the screws, but you would need to have a way of getting the rack off the van when needed, I.e. with the tailgate is open, which from the earlier posts looks possible and may be a solution If you leave the rack on at all times

68CA80F4-8CFD-4442-925B-10ED987412DB.png
 
I only have 1 tray and none of the arm clamps on unless needed. I do this as I like a clear view out the rear window. Maybe this could be a deterrent as it's not worth stealing with half the parts missing.

When in use I only put the arms/trays on which are needed

20200703_184957.jpg
 
So to summarise where I think we are at,

The T6 Quasimodo (new style) rack is super simple to undo. Access to the securing bolts could hardly be easier.
1593799247338.png
It comes with some attempt at security bolts, but as they are all the same (seemingly), it would be very easy to go equipped. Access is very easy. Replacing each of those bolts with different unusual heads will challenge the thief further, but access to the bolts remains easy.

The T5 and the rare T6 Kylie racks are also vulnerable, but there is much less room for the thief to work in and the bolts aren't immediately visible (But still alarmingly easy access!)
1593799336694.png
With the standard supplied hex bolts fitted, they can be undone with the short end of an allen key (not the long end or the supplied tool). Adding security bolts to them may make these models doubly more difficult to steal as the right head would be needed but more importantly, the size of the head might make access impossible. If that's true, then brute force would be required.

Upshot - If you are leaving either rack on your van secured with standard supplied bolts, you are taking a high risk. If you have the Quasimodo and standard bolts....well, I'll leave those words to you.
 
Last edited:
Good topic and attempt to stay on topic ;)

so while we try and get to root cause and possible deterrent.. How about plenty of lock tight, assemble and then shred the heads of those structural bolts to avoid that scenario where these are undone (cheaper and probably more effective that security bolts). Then get onto how to secure the fixing bolts (possibly decent security bolts if they help at all)?

This won’t protect from angle grinders And brute force but I’m assuming this would damage rack reducing resale value and may put off thieves
 
I only have 1 tray and none of the arm clamps on unless needed. I do this as I like a clear view out the rear window. Maybe this could be a deterrent as it's not worth stealing with half the parts missing.

When in use I only put the arms/trays on which are needed

View attachment 62141

not considered this but most of use probably need extra trays otherwise could just chuck the bike inside.
 
I’ve just posted on the VW Facebook thread, including a link to this forum. Let’s see if they comment or say anything

Ok while we want to find route cause and quick fix. Not sure we want to make it too public. It’s like the old “VW window feature”. Once known and publicised every 16 year old thought they were professional thieves. Queue lots of damaged locks with screwdriver damage. Manufacturers don’t like to admit design flaws. ;)
 
Calling all mods. I'm wondering if this thread should be hidden now, or put in the VIP section at least, and perhaps a mailshot to all members with a warning to use security bolts, to remove their rack more frequently. The forum shop could provide kits of security bolts for each rack (different lengths I believe....60mm for T5 and Kylie, looks like 50mm for Quasimodo.
I'm reporting my post to attract their attention.
 
Back
Top