M
MikeCW
Lifetime VIP Member
We’ve just done our first night away in our new PHEV T7 California Ocean. It was -1’C outside…Plugged into mains, full tank of fuel, we set the auxiliary heater to continuous operation. However after 3-4 hours of operation we were tired of the constant rhythmic knocking noise, very light but noticeable and enough to keep us awake. I turn the heater off until I woke 6 hours later, by which point the van was freezing. When I tried to turn the heating on, I immediately got an error saying emissions limit reached and van needed to e driven above 5km/h - no practical at 5 am..
I know that heat immediately gives this message and it may be that I selected heat immediately in my sleep haze and it counted the 4+ hours of continuous operation the previous night, but either way, we were freezing and the heating wouldn’t work in either continuous or heat immediately mode until we had driven then vehicle.
Has anyone else come across this “feature” - my dealer tried to tell me that the heater in either mode is only designed run for a maximum of 3 hours, including the technician, but I have gently suggested he goes back and checks this with VW as I know from other forums that you have to use continuous mode overnight…Is the knocking normal? Has anybody else had the emissions error after using continuous mode?
I know that heat immediately gives this message and it may be that I selected heat immediately in my sleep haze and it counted the 4+ hours of continuous operation the previous night, but either way, we were freezing and the heating wouldn’t work in either continuous or heat immediately mode until we had driven then vehicle.
Has anyone else come across this “feature” - my dealer tried to tell me that the heater in either mode is only designed run for a maximum of 3 hours, including the technician, but I have gently suggested he goes back and checks this with VW as I know from other forums that you have to use continuous mode overnight…Is the knocking normal? Has anybody else had the emissions error after using continuous mode?
Last edited:













