Sorry Now Sold Ocean T6 full width tailgate drawer

[Tim Hook]

Unhappy with the prices to purchase I decided to make my own drawer.
I used professional welders to make the frame from 5mm aluminium angle and I bent a 3.5mtr length of 2mm ali angle for the surround of the floor tray, which is 12mm marine ply. The slider rails are purchased from Amazon, rated 85kg.

Internal dimensions of the tray are 94cm wide x 78cm deep. 29.5cm high to the lowest fitting of the parcel shelf/bed frame.
Some photos are attached.

I’m selling this one because I made two of them. The scale of economies, using welders and delivery of aluminium & rails etc. it was cost effective to make two and sell one.

I’m based in South London if anyone to wants to view at any time and I’m looking for £275.

 

[cayman57]

Hi Tim
I’m interested and have sent you pm

 

[King]

Hi how do these fix onto the rails. Are. They easily removed. Thanks

 

[Tim Hook]

The frame is secured to the floor rails using T Bolts as per pictures.
It's perhaps a tad fiddly to get the frame lined up with the bolts but I wouldn't think it beyond the means of anyone who owns a campervan .

 

[Trevor Brown]

Unhappy with the prices to purchase I decided to make my own drawer.
I used professional welders to make the frame from 5mm aluminium angle and I bent a 3.5mtr length of 2mm ali angle for the surround of the floor tray, which is 12mm marine ply. The slider rails are purchased from Amazon, rated + 85kg.

Internal dimensions of the tray are 94cm wide x 78cm deep. 29.5cm high to the lowest fitting of the parcel shelf/bed frame.
Some photos are attached.

I’m selling this one because I made two of them. The scale of economies, using welders and delivery of aluminium & rails etc. it was cost effective to make two and sell one.

I’m based in South London if anyone to wants to view at any time and I’m looking for £275.
View attachment 62352View attachment 62353View attachment 62354View attachment 62355View attachment 62356View attachment 62358View attachment 62359View attachment 62360View attachment 62361

Thats a beautifully constructed piece!
Congratulations!

 

[Trevor Brown]

Unhappy with the prices to purchase I decided to make my own drawer.
I used professional welders to make the frame from 5mm aluminium angle and I bent a 3.5mtr length of 2mm ali angle for the surround of the floor tray, which is 12mm marine ply. The slider rails are purchased from Amazon, rated + 85kg.

Internal dimensions of the tray are 94cm wide x 78cm deep. 29.5cm high to the lowest fitting of the parcel shelf/bed frame.
Some photos are attached.

I’m selling this one because I made two of them. The scale of economies, using welders and delivery of aluminium & rails etc. it was cost effective to make two and sell one.

I’m based in South London if anyone to wants to view at any time and I’m looking for £275.
View attachment 62352View attachment 62353View attachment 62354View attachment 62355View attachment 62356View attachment 62358View attachment 62359View attachment 62360View attachment 62361

Tim
Could I just ask if you have just two fixings into the sliding rail? Both immediately at the back of the seat?

 

[Tim Hook]

Hi Trevor,
Yes, that's correct, just 2 x T bolts secure it to the floor.
I did have the welders place a strap halfway down the frame, it's visible on photos with the drawer open.
But when it was fixed in the van with the 2 x bolts, I didn't feel another needed putting through that strap.
One could it one wanted, there's just enough room to trim a T bolt and put a thin nut on it.
Tim

 

[Trevor Brown]

Hi Trevor,
Yes, that's correct, just 2 x T bolts secure it to the floor.
I did have the welders place a strap halfway down the frame, it's visible on photos with the drawer open.
But when it was fixed in the van with the 2 x bolts, I didn't feel another needed putting through that strap.
One could it one wanted, there's just enough room to trim a T bolt and put a thin nut on it.
Tim

Tim
Thanks for your prompt and helpful reply!
Trevor

 

[Rowls1958]

Hi is this sold now ?

 

[Tim Hook]

Sorry, just sold this morning.

 

[Madhutter]

Unhappy with the prices to purchase I decided to make my own drawer.
I used professional welders to make the frame from 5mm aluminium angle and I bent a 3.5mtr length of 2mm ali angle for the surround of the floor tray, which is 12mm marine ply. The slider rails are purchased from Amazon, rated + 85kg.

Internal dimensions of the tray are 94cm wide x 78cm deep. 29.5cm high to the lowest fitting of the parcel shelf/bed frame.
Some photos are attached.

I’m selling this one because I made two of them. The scale of economies, using welders and delivery of aluminium & rails etc. it was cost effective to make two and sell one.

I’m based in South London if anyone to wants to view at any time and I’m looking for £275.
View attachment 62352View attachment 62353View attachment 62354View attachment 62355View attachment 62356View attachment 62358View attachment 62359View attachment 62360View attachment 62361

Lovely bit of kit do you have a link to the slider rails that you bought?

 

[Tim Hook]

here you go...........
VADANIA D2053 Heavy Duty Drawer Runners, 700mm with Lock, Full Extension Ball Bearing, 1-Pair
https://www.amazon.co.uk/dp/B07SD44LH2/?tag=unique09f-21