Aubisque
VIP Member

I have had both fitted to my T6 and after someone tampered with quasi I change it to Kylie.Tough choice, but I think I have eventually decided on a Kylie for a T6 for two main reasons :
- doesn’t stick out as far when closed which is a consideration for the garage
- looks sleeker and the slightly more impracticality compared to the newer one is offset by how often we will be carrying bikes.
But a question : for those with a Kylie on a T6 with reversing camera, it looks like the horizontal bar could cover the lense. Any issues with that ? I can’t quite tell.
Thanks
Sorry I never measured but would think a good few of inches Kylie sits closer to the vehicle and is not as bulky as Quasi Hope that helps.Thanks pmrw.
Could you estimate a distance when you say Kylie sits flatter than quasi?
Sounds like you think it is considerable?

I assume a bar mounted rack would affect the parking sensors?Get a tow rack like the Thule G6. No one cares about scratches and dents? Having 50+ KG hanging on 4 small contact points?
Advantages with a tow rack:
You can open the tailgate with four bikes on.
No problem with dents and scratches.
You have a clear view in the rear window/mirror.
It does not add to the fuel consumption.
You can go inside 2m parkings with bikes loaded.
Road tolls are cheaper.
Not if the electrics are correctly installed and the computer is correctly coded. The rear sensors are turned off when the plug is inserted. Would be the same for a tow bar bike rack too, as this would need a lighting board to be legal.I assume a bar mounted rack would affect the parking sensors?
As stated Rear Parking Sensors are Disabled. If you also have a Rear Camera this still operates so you can still use this as an aid if you do not have a bicycle cover on.I assume a bar mounted rack would affect the parking sensors?
Just to make life more complicated, does anyone know if either of these would accommodate a fat bike?
Sent from my iPad using Tapatalk
My bike has 3" tyres, and even they sit on top of the rails, not inside them...
Hmmm. Ok thank you. I don’t suppose you know if the ‘cups’ that hold the wheels are removable? I ask because Thule sometimes sell separate ‘cups’ to mount on carriers for fat bikes.
Sent from my iPad using Tapatalk
Yes they are. I've taken them off. I don't like them, and the plastic straps aren't long enough for my bike anyway, so they will be nowhere near long enough for a fat bike.
I've bought this from Amazon:
https://www.amazon.co.uk/dp/B01I19GV6S/?tag=unique09f-21
I will shorten them and use them like the system on the T5 rack.
Just to make life more complicated, does anyone know if either of these would accommodate a fat bike?
Sent from my iPad using Tapatalk
The Quasimodo style has wider trays which fit fatter tyres better and the sliding wheel holders should make it easier to hold the tyres. I’ve used both with 2.4 inch tyres and the Quasi is noticeably better for those tyres. The Kylie is more old school (think 2 inch tyres) but does fit them at a squeeze. But there is not that much in it. How fat are your tyres? 4 inch? 3 inch?
Sent from my iPhone using Tapatalk

Thanks Rupert, I’m running 3.8” tyres on a Trek Farley. Looks like it’s a quasi for me and I will try and sell my (almost new) Atera Strada on here to ease the pain.
Sent from my iPhone using Tapatalk
Thanks Rupert, I’m running 3.8” tyres on a Trek Farley. Looks like it’s a quasi for me and I will try and sell my (almost new) Atera Strada on here to ease the pain.![]()



The plastic straps are too short on the Quasi wheel chocks - they won't go around your 3.8" wheels...
I've tried to show the dimensions as best I can below with the strap on the very longest possible setting. The "height" of the tyre and rim to fit within the strap could be no more than about3.5”
Nothing fits 4.8” jumbo Jim’s![]()
The VW California Club is the worlds largest resource for all owners and enthusiasts of VW California campervans.