How are VW Tailgate racks stolen?

Their products are quite bewildering but, as you can see from the earlier photos, the 4mm Hexlox fits the M6 bolt they supplied to me.
I presume they send locks that fit whichever bolt they supply. Good luck.

I hope so! This was for bolts with hex heads. They apparently have bolts with different heads.
 
Received my order today.
The bolts that I ordered M6 (5mm Hexlox) are only part threaded and are not suitable for fixing the bike rack.

I guess the M6 bolts with the 4mm Hexlox is the way to go.
634efc3661ee34f8bf58c7dbd957d951.jpg


Sent from my CLT-L09 using Tapatalk
 
Received my order today.
The bolts that I ordered M6 (5mm Hexlox) are only part threaded and are not suitable for fixing the bike rack.

I guess the M6 bolts with the 4mm Hexlox is the way to go.
634efc3661ee34f8bf58c7dbd957d951.jpg


Sent from my CLT-L09 using Tapatalk
You would probably be better getting a “pan head” bolt head - less chance of the Bolt heads being gripped by pliers or similar to screw out regardless of the Hexlox. The 50mm M6 pan head bolt supplied by Hexlox definitely uses the 4mm insert as previously identified and confirmed by Hexlox.
 
You would probably be better getting a “pan head” bolt head - less chance of the Bolt heads being gripped by pliers or similar to screw out regardless of the Hexlox. The 50mm M6 pan head bolt supplied by Hexlox definitely uses the 4mm insert as previously identified and confirmed by Hexlox.
Yes, I realise that now! If they had told me the bolt was part threaded before, I wouldn't have ordered it.

Sent from my CLT-L09 using Tapatalk
 
Yes, I realise that now! If they had told me the bolt was part threaded before, I wouldn't have ordered it.

Sent from my CLT-L09 using Tapatalk
just cut the thread further down with a 6mm die cutter. easy job. a bolt always has a shank. a set screw is a bolt thats fully threaded all the way to the head
 
just cut the thread further down with a 6mm die cutter. easy job. a bolt always has a shank. a set screw is a bolt thats fully threaded all the way to the head


Sent from my CLT-L09 using Tapatalk
 
Photo
0e97dbb779b6e1ea8efeb7558bceec4b.jpg


Sent from my CLT-L09 using Tapatalk
 
As the reply above, the pitch is defined by the size.... M5 or M6 is all you need
 
Received my order today.
The bolts that I ordered M6 (5mm Hexlox) are only part threaded and are not suitable for fixing the bike rack.

I guess the M6 bolts with the 4mm Hexlox is the way to go.
634efc3661ee34f8bf58c7dbd957d951.jpg


Sent from my CLT-L09 using Tapatalk
What a shame. As we said, it’s tricky working out what you need from their website.
 
As the reply above, the pitch is defined by the size.... M5 or M6 is all you need

The M6 dies seem to come in two pitch sizes - 1mm and 0.75mm. Whilst awaiting my M6 bolts with 5mm Hexlox, I've purchased an M6 die with 1mm pitch. Just wondering how much thread I would have to cut...
 
Last edited:
The M6 dies seem to come in two pitch sizes - 1mm and 0.75mm. Whilst awaiting my M6 bolts with 5mm Hexlox, I've purchased an M6 die with 1mm pitch. Just wondering how much thread I would have to cut...
I find that very hard to believe as the whole idea of naming a thread is to make them interchangeable. As long as you get sorted it doesn’t matter.
 
I find that very hard to believe as the whole idea of naming a thread is to make them interchangeable. As long as you get sorted it doesn’t matter.

The cheapest die I found was on eBay (a mere £4.95 - I'll probably only use it once), and I had to choose M6 x 1 or M6 x 0.75. Hence my queries about pitch size.
 
The cheapest die I found was on eBay (a mere £4.95 - I'll probably only use it once), and I had to choose M6 x 1 or M6 x 0.75. Hence my queries about pitch size.
measure the pitch with an accurate rule or vernier if you have one. i reckon its 1mm pitch as 0.75 is a fine thread
 
Although there does seem to be coarse and fine versions of some metric threads, this suggests the standard in 1mm for an M6
Screenshot_20200723_125907_com.android.chrome.jpg
 
Hexlox advised me the M6 thread pitch was 1mm.
 
My hexlox arrived. Easily fitted. Tried to remove the hexlox from the pan head bolt using a normal magnet but couldn’t. As the bolt is magnetic, the magnet just sticks to the bolt. The insert doesn’t move. To be fair it’s hard to get just the hexlox out with the special key. I’m really happy with them and think it will deter the average bike rack thief. Just need to hide this thread from them now
 
Just need to hide this thread from them now
We moved it to the vip area so hopefully not accessible to the public. Also, I think your hex locks are unique (ish) to you.
 
Haven't got the HexLox yet, but got some bolts and die off ebay. Needed to cut about 1cm of thread, which works fine on a T6 rack. It seemed that 50mm bolts are much longer than necessary. Could probably get away with 40mm or less, which would have a shorter shank and maybe need less cutting.

The cut portion will corrode badly however. Will need to treat it.

IMG_3956.JPG

IMG_3959.JPG
 
Good work!

Sent from my CLT-L09 using Tapatalk
 
Back
Top