How are VW Tailgate racks stolen?

I have ordered bolts from Amazon. I will test them to see if they fit and if they are magnetic. If so I'll order the size Hexlox that fit the new bolts, I won't know until they arrive and I've had a chance to measure them.

Sent from my CLT-L09 using Tapatalk
 
I have ordered bolts from Amazon. I will test them to see if they fit and if they are magnetic. If so I'll order the size Hexlox that fit the new bolts, I won't know until they arrive and I've had a chance to measure them.

Sent from my CLT-L09 using Tapatalk

looks like we need a 50 mm long bolt (coned head) with 6mm thread and a 5mm hex fitting - then 2 No 5 mm Hexlox attachments
 
I went with the pan head M6 50mm bolt with the recommended 4mm hexlox.

Found a 10% discount code too - STOLENRIDEHEXLOX2019
 
I went with the pan head M6 50mm bolt with the recommended 4mm hexlox.

Found a 10% discount code too - STOLENRIDEHEXLOX2019

Are2AAD0346-BAA8-48C0-80E5-C61A1C12102D.jpeg you sure you a right with 4mm Hexlox ?
M6 50 mm bolt has a 5mm hex head, therefore, should it not be a 5mm Hexlox fitting ?
 
If you have the kylie (T5) style rack, you can get these M6 x 60 pin torx and bend the pin slightly once installed as it’s very difficult to straighten the pin with the tailgate closed but easy when open if you ever need to remove it.

 
Ah, pan head bolts are using smaller size hexlox than a standard bolt by the looks of it
 
I went with the pan head M6 50mm bolt with the recommended 4mm hexlox.

Found a 10% discount code too - STOLENRIDEHEXLOX2019
Thanks for the discount code

Sent from my CLT-L09 using Tapatalk
 
The bolts need to be 50mm long to enable installation.

Getting the bolt to engage with the tapped bar inside the clamp is a real PITA. It took me over an hour to do when I changed the standard bolts for the Club Torx security ones a couple of years ago.

Alan
 
The bolts in the VW rack are M6. The torx bolts have a little lug in the socket which will prevent a hexlox being inserted therefore you need to replace them with a suitable alternative. For an M6 bolt you need a 4mm Hexlox. If you have non-magnetic bolts you can get a Hexlox MI which includes a magnetic insert.
Enter this discount code to get 10% off: STOLENRIDEHEXLOX2019
 
The bolts in the VW rack are M6. The torx bolts have a little lug in the socket which will prevent a hexlox being inserted therefore you need to replace them with a suitable alternative. For an M6 bolt you need a 4mm Hexlox. If you have non-magnetic bolts you can get a Hexlox MI which includes a magnetic insert.
Enter this discount code to get 10% off: STOLENRIDEHEXLOX2019

Thanks for the info David -have you actually used the Hexlox system ?
 
For an M6 bolt you need a 4mm Hexlox. STOLENRIDEHEXLOX2019

Not necessarily, it depends which bolt you order.
cb77781fa64694ff665f22c95e831bd2.jpg


Sent from my CLT-L09 using Tapatalk
 
I put my order in and they clarified my requirements. Just waiting for it to arrive so I’ll let you know.
 
Hexlox have arrived from Germany. Attached are photos of the original bolts front and back and the new bolts as they came and as fitted complete with Hexlox inserted.
I think the rack can go back on the van now.

941CB5DF-3421-438D-BF86-4F78FEE552F2.jpeg

B10ED618-C46F-4F4A-B401-FAAB7B2F2FA1.jpeg

09EB79DD-73E1-49CA-886F-D6C367C30DB5.jpeg

77A055DA-BE4A-43A1-82B5-00DE8FD568CD.jpeg
 
Thanks for those details and photos. Although I've tried to understand how these work I've failed! Obviously they stop access to the bolt head but what's to stop a thief carrying a magnet and pulling the insert out? As far as I remember, magnets just have 2 poles, not infinite.
 
I think removing them is close to impossible. I can only refer you to their FAQ:
 
Thanks for those details and photos. Although I've tried to understand how these work I've failed! Obviously they stop access to the bolt head but what's to stop a thief carrying a magnet and pulling the insert out? As far as I remember, magnets just have 2 poles, not infinite.
Some good info in this article and video
 
I ordered M6 bolts and 4mm Hexlox.
I have to say their website is quite confusing and I had a good few email exchanges before ordering and even then I’ve ended up with 4 bolts !

8A41B96C-1DDC-4E30-AFA9-ED7F6C9D6996.jpeg
 
I ordered M6 bolts and 4mm Hexlox.
I have to say their website is quite confusing and I had a good few email exchanges before ordering and even then I’ve ended up with 4 bolts !

View attachment 63170
Thanks David - I thought that was the spec but just wanted to check. As you say the site is a little confusing !
Thanks again
John
 
I've just ordered two m6 50mm bolts and two 5mm hexlox. This was their suggestion.
 
Their products are quite bewildering but, as you can see from the earlier photos, the 4mm Hexlox fits the M6 bolt they supplied to me.
I presume they send locks that fit whichever bolt they supply. Good luck.
 
Back
Top