levithecat
VIP Member
- Messages
- 9
- Vehicle
- T5 SE 180
Similar to the Brandrup ISO-TOP.
This had been fitted in my 5.1.
Stays in place permanently when you raise or lower the pop top roof.
Provides complete blackout and sound insulation.
Fits California T5, 5.1, T6 + 6.1. Original full instructions and the bag it came in will be included. The fitting tabs are included, but about 9 metres of 25mm wide Velcro adhesive hook tape will be needed.
A fitting kit from Brandrup could be used.
The liner was successfully washed in the machine, but there are a few faint mold spots - see pics.
You must have an external roof bungee fitted to make sure it closes properly.
£75 including £5 postage (approx)





This had been fitted in my 5.1.
Stays in place permanently when you raise or lower the pop top roof.
Provides complete blackout and sound insulation.
Fits California T5, 5.1, T6 + 6.1. Original full instructions and the bag it came in will be included. The fitting tabs are included, but about 9 metres of 25mm wide Velcro adhesive hook tape will be needed.
A fitting kit from Brandrup could be used.
The liner was successfully washed in the machine, but there are a few faint mold spots - see pics.
You must have an external roof bungee fitted to make sure it closes properly.
£75 including £5 postage (approx)


















