180 T5.1 2010 Oil results are in.......

You can stress over it for next couple of years and get nowhere or get someone with a TPS account to buy a replacement engine for you and get it fitted locally. It cost me about £5500 for a new crate engine, timing belt kit and other bits and bobs. Not ideal by any means, but at least it won’t be needing any work for years to come. I expect labour to cost you £1k unless you are handy with a spanner
What year was the cost quoted in your post above ?
Vw no longer do a new crate engine, everything they supply is reconditioned factory spec.
I belive they only now supply a base lump, the aux and ancillary units are not included
 
What year was the cost quoted in your post above ?
Vw no longer do a new crate engine, everything they supply is reconditioned factory spec.
I belive they only now supply a base lump, the aux and ancillary units are not included
I bought the crate engine from TPS Guildford In January with no issues.

Cant comment on current availability and never heard about VW supplying recon engines. I cant see VW overboring cylinders and oversize piston rings and warrant such job.

I would however suggest you check with VW for availability status to ensure your statement is correct.
PN: 03L100092A -base engine- £3708.69 including 5% discount excluding VAT invoice dateJ an 2026

Crate engine comes as long block with injectors, glowplugs, waterpump and egr cooler rev D.
Anything else including timing kit needs to be bought separately and other timing sprockets/cogs, studs carried across from your old engine.
Good time to replace all other components like leaky coolant flange, thermostat, aux pulleys, belt, gearbox slave/ cylinder(which includes the throw bearing ) etc

Hope below photos help

IMG_8500.jpeg

IMG_8509.jpeg

View attachment IMG_8572.jpeg

View attachment IMG_8571.jpeg

View attachment IMG_8573.jpeg

8e349a9a-64ff-487d-9f9f-6b972dc446b8.jpeg

View attachment IMG_8625.jpeg

IMG_8624.jpeg
 
Last edited:
I bought the crate engine from TPS Guildford In January with no issues.

Cant comment on current availability and never heard about VW supplying recon engines. I cant see VW overboring cylinders and oversize piston rings and warrant such job.

I would however suggest you check with VW for availability status to ensure your statement is correct.
PN: 0 3100092A -base engine- £708.69 including 5% discount excluding VAT invoice dateJ an 2026

Crate engine comes as long block with injectors, glowplugs, waterpump and egr cooler rev D.
Anything else including timing kit needs to be bought separately and other timing sprockets/cogs, studs carried across from your old engine.
Good time to replace all other components like leaky coolant flange, thermostat, aux pulleys, belt, gearbox slave/ cylinder(which includes the throw bearing ) etc
Fortunately I'm not in need of a new engine.

My comment was about the cost and date timeline (to assist others in determining how recent)
My comment about VW crate engine is a leading Question, (directly on the back of someone's observation that the engine is now a re manufactured engine from VW factory) which is pertinent to the question about time line and cost.

I'm not suggesting VW are taking old engines and honing them or boring them to oversize and sending the, back out the door like an engine recon company most probably do.

What I am suggesting; it's perfectly reasonable that VW take back a returned engine / cylinder lump, strip it fully, inspect it to OE specifications, (record the findings for there own purposes) clean and reconditioned it to as new condition, remove old bore sleeves, fit new (same size) factory OE bore sleeves , pistons, shells, crank, etc etc lap all corresponding faces, fit new standard ancillaries and ship it as a "VW factory unit".

I will try to find the thread and comment.

Quick availability search via three known sources:



 
Additional related threads to help others in future


 
Fortunately I'm not in need of a new engine.

My comment was about the cost and date timeline (to assist others in determining how recent)
My comment about VW crate engine is a leading Question, (directly on the back of someone's observation that the engine is now a re manufactured engine from VW factory) which is pertinent to the question about time line and cost.

I'm not suggesting VW are taking old engines and honing them or boring them to oversize and sending the, back out the door like an engine recon company most probably do.

What I am suggesting; it's perfectly reasonable that VW take back a returned engine / cylinder lump, strip it fully, inspect it to OE specifications, (record the findings for there own purposes) clean and reconditioned it to as new condition, remove old bore sleeves, fit new (same size) factory OE bore sleeves , pistons, shells, crank, etc etc lap all corresponding faces, fit new standard ancillaries and ship it as a "VW factory unit".

I will try to find the thread and comment.

Quick availability search via three known sources:





VW used to offer a buy back for the old engines as a goodwill gesture to lower the costs to existing affected owners. this is not the case anymore. However they have never accepted liability or issued a recall.
I highly doubt VW or any manufacturer for that matter will buy back and engine and do the extensive work you mentioned.
In addition, CFCA never had cylinder liners. Majority failed engines are due to engine bore scoring requiring significant oversizing and piston rings to suit.

You or a friend with a TPS account would need to call and confirm availability. The links you shared is a reflection to their current availability in stock on shelf. It would have to come from Germany.

In fact I will drop them an email myself to confirm availability
 
VW used to offer a buy back for the old engines as a goodwill gesture to lower the costs to existing affected owners. this is not the case anymore. However they have never accepted liability or issued a recall.
I highly doubt VW or any manufacturer for that matter will buy back and engine and do the extensive work you mentioned.
In addition, CFCA never had cylinder liners. Majority failed engines are due to engine bore scoring requiring significant oversizing and piston rings to suit.

You or a friend with a TPS account would need to call and confirm availability. The links you shared is a reflection to their current availability in stock on shelf. It would have to come from Germany.

In fact I will drop them an email myself to confirm availability
Hi Alex , I will not be calling TPS or any of the other suppliers, for the reasons given in my previous post.

I have had a cursory look for the post where someone says about the engine now being re manufactured by the factory. I cannot find the post, if anyone can find it please post it in this thread

Edit; most Engine manufacturers use cylinder bore liners from new, by design, the cylinder jacket casting would not make for a very good cylinder when machine and honed.
sleeves are fitted to the block, to ensure the bores are within tolerance and create a resilient surface for the piston rings to rub against, bore liners fitted to factory engines are far harder, by design than the casting material and are an integral part of modern engines. I think you miss understand what I am saying on many fronts - DYOR regarding modern engines design and how the bores are fitted to the casting at the factory.

Your email response from TPS may help others in future ,

I feel myself getting drawn into this thread, as if I have an issue ! (I don't own a 180)

It is a subject I have limited interest in, other than to try and assist unfortunate others.

Your experiences may assist others better.

For that reason I'm out.
 
Last edited:
I genuinely value your input and overall contribution to the forum ,and I believe that encouraging open discussion helps us establish accurate and reliable information that can benefit both current and future owners who may come across this subject.

I also apologise if I came across as confrontational or abrupt, as that was certainly not my intention. My aim is simply to encourage constructive discussion and a better understanding of the subject.

I encourage anyone to challenge my opinions or claims as this way iI might have the opportunity to learn something new. :thumb
 
I genuinely value your input and overall contribution to the forum ,and I believe that encouraging open discussion helps us establish accurate and reliable information that can benefit both current and future owners who may come across this subject.

I also apologise if I came across as confrontational or abrupt, as that was certainly not my intention. My aim is simply to encourage constructive discussion and a better understanding of the subject.

I encourage anyone to challenge my opinions or claims as this way iI might have the opportunity to learn something new. :thumb
Hi Alex ,

No issue with yourselves or the info and experience you're trying to impart

Open discussion is exactly what makes the forum a mind of useful information.

My input isn't going to add anything to the situations that others are unwittingly finding themselves in regarding the 180 engine failures, the Symantec's of whether modern engines use cylinder bore liners or not make no real difference , nor does the issue of whether VW are or are not using existing cylinder jackets instead of manufacturing new castings, none of which add any real practical advise to the overall discussion, it merely distracts from the actual issue that others are suffering, it is for that reason I'm out.

EDIT : Don't underestimate the difficulties VW are currently in and the extreme cost saving modes they will introduce to survive as an organisation.
An engine casting is a severe cost to VW, if they can they will take / make all cost savings feasible
 
Last edited:
Safe to say a crate CFCA 03L100092A is still available with option for a trade in too.
This is by far the cheapest option compared to any overpriced online prices showing.
In fact I’d say it’s cheaper than a rebuild.


Retail £3903.88 + vat
Trade £3747.72 + vat

IMG_4394.jpeg
 
I didn’t know the oil pumps were converted to belt drive?

Great find Sidepod. Thank you for sharing
I think the take away is a new replacement engine with regular 6k miles service intervals would be the cheapest and trouble free approach for years to come.
If in Poland where labour is cheaper is deemed that adding new injectors brings the recons cost to a new engine. Safe to say, in uk there’s no way to beat the price of a new engine by reconditioning the existing faulty one without cutting corners.
 
Great find....I spent a bit of time on EGR coolers and jury was still out on the D suffix at the time I went down the emulator route......still noted as such
The Revised EGR Cooler (Suffix "D"): Volkswagen introduced an updated EGR cooler version ending in "D" (part number 03L115512D) around March 2015 to address the degradation issue. However, some community discussions on the VW T6 Transporter Forum suggest that even the D-type cooler can eventually degrade over extended periods
Yes, the Revision "D" EGR cooler (03L115512D) can still fail, though it is significantly more durable than the original A, B, and C versions. While Volkswagen introduced the D-revision with upgraded internal cooling fins to prevent rapid aluminum corrosion, long-term real-world use has shown that it is not a permanent, 100% bulletproof fix
 
Great find....I spent a bit of time on EGR coolers and jury was still out on the D suffix at the time I went down the emulator route......still noted as such
Indeed. My own research led me to the same findings. Mostly raised with the t6 owners since they covered more miles from new than t5.1 owners with rev D retrofit/upgrade.
I went down the EGR delete kit which is discrete and doesn’t stand out for the mot tester.
No issues whatsoever with the emissions.
Had the dpf in concrete cleaner for half a day and flashed with water repeatedly until it looked like brand new and pretty much no pressure difference at idle between pre/post dpf sensors(through VCDS)
Although I had no issues with the dpf I thought better give it a clean whilst it’s out
 
Great find Sidepod. Thank you for sharing
I think the take away is a new replacement engine with regular 6k miles service intervals would be the cheapest and trouble free approach for years to come.
If in Poland where labour is cheaper is deemed that adding new injectors brings the recons cost to a new engine. Safe to say, in uk there’s no way to beat the price of a new engine by reconditioning the existing faulty one without cutting corners.
Difficult one. First oversize pistons kits seem to be around £350 which isn’t bad. Add in machining costs to bore the block, probably £500. Possibly a crank grind and bearings.
Deffo a cheaper option if a diy job. Certainly the route I’d take if it was me.
As per the vid, it all depends on how early you catch it and how bad the rest of the engine is.
 
Interesting thread on the T6 Forum regarding rebuilding an engine.

 
Interesting thread on the T6 Forum regarding rebuilding an engine.

Interesting read. Quite a few variables in there. It’ll be interesting to see if it survives once built.
It sounds to me as if the original block lacks torsional rigidity, it’s a long time since I’ve heard discussion of or seen a lip at the top of a bore!
 
Currently in talks with VW Customer Services. They're going to do their own diagnostic checks on the engine and we will go from there.
 
Mine is a March 2010 180BHP twin turbo, one of the first as the engine was introduced at that time. In 2015 mine started using oil at a rate of a litre every few hundred miles, quite suddenly on a trip from U.K. to Germany. Mileage about 45K.

I complained to VW customer services and they offered a new engine fitted by a VW dealer, with me paying 30% and VW 70%. I proceeded on that basis.

I was told at that time that I was one of the last that they agreed to help out.
I'm so glad to hear you had your situation resolved. VW have said today that they deal with each case on an individual basis and can see how my vehicle has been cared for.
 
Back
Top