Safe loading on the sink glass cover

nigpdreadingfc

nigpdreadingfc

VIP Member
Messages
362
Location
Cheshire
Vehicle
T6.1 Ocean 199 4Motion
I am looking to use a Cosori Mini air fryer in my T6.1. My hope is to use it on the glass sink cover, with suitable insulation and protection between the glass and the air fryer. That way I can use the hobs at the same time. The fryer weighs 2.3kg. I have thought of using a board across the sink, with the glass top in the raised position, but am concerned that the hot exhaust from the fryer would damage/crack the glass.
Does anyone have experience of safely using similar, avoiding breaking the glass or having any other problems?
Thanks in advance for your help
 
Last edited:
I use my air fryer in my 55 on the glass top which has a 'pixers'sticker on to protect and I've never had an issue. I always have the sliding window behind it open to help remove heat fumes asap
 
I am looking to use a Cosori Mini air fryer in my T6.1. My hope is to use it on the glass sink cover, with suitable insulation and protection between the glass and the air fryer. That way I can use the hobs at the same time. The fryer weighs 2.3kg. I have thought of using a board across the sink, with the glass top in the raised position, but am concerned that the hot exhaust from the fryer would damage/crack the glass.
Does anyone have experience of safely using similar, avoiding breaking the glass or having any other problems?
Thanks in advance for your help
Not exactly what you are suggesting, but we have this setup with the Mini - never had heat issues from underneath.1794988520405.png
 
Window open, back legs on the window frame, weight on the glass top hinges, silicon mats to rest the tray on?
Yes, 3d printed leg extensions and a 3d printed closing panel to try and keep heat in and smells out. The positioning is much more about venting outside rather than moving the weight.
 
Yes, 3d printed leg extensions and a 3d printed closing panel to try and keep heat in and smells out. The positioning is much more about venting outside rather than moving the weight.
Nice. Very neat solution
 
Last edited:
Back
Top